亚洲中文字幕无码爆乳网站,国产激情自拍亚洲一级黄色,国产又粗又爽又刺激视频,午夜日本大胆裸艺术,婷婷大伊香蕉五月天视频,国产裸舞凸点福利小视频,国产私拍大尺度在线视频,少妇人妻精品中文在线有码,亚洲香蕉国产高清在线播放,老鸭窝在线视频国产免费

Thermal gas mass flow meter

Thermal gas mass flow meter

適用介質(zhì)Gas

不適用介質(zhì)Liquid

Thermal gas mass flow meter is designed on the basis of thermal dispersion, and adopts method of constant differential temperature to measuring gas flow. It has advantages of small size, easy installation, high reliability and high accuracy, etc.
0371-26665688 13353783998
產(chǎn)品詳情說(shuō)明

Introduction


Thermal gas mass flow meter contains two platinum resistance temperature sensors. The thermal principle operates by monitoring the cooling effect of a gas stream as it passes over a heated sensor. Gas flowing through the sensing section passes over two sensors one of which is used conventionally as a temperature sensor, whilst the other is used as a heater. The temperature sensor monitors the actual process values whilst the heater is maintained at a constant differential temperature above this by varying the power consumed by the sensor. The greater the gas velocity, the greater the cooling effect and power required to maintain the differential temperature. The measured heater power is therefore a measure of the gas mass flow rate.


Features

  • Measuring the mass flow or volume flow of gas

  • Do not need to do temperature and pressure compensation in principle?with accurate measurement and easy operation.

  • Wide range: 0.5Nm/s~100Nm/s for gas. The meter also can be used for gas leak detection

  • Good vibration resistance and long service life. No moving parts and pressure sensor in transducer, no vibration influence on the measurement accuracy.

  • Easy installation and maintenance. If the conditions on site are permissible, the meter can achieve a hot-tapped installation and maintenance. (Special order of custom-made)

  • Digital design, high accuracy and stability

  • Configuring with RS485 or HART interface to realize factory automation and integration


Technical parameters


Description

Specifications

Measuring Medium

Various gases (Except the acetylene)

Pipe Size

DN15~DN1600mm

Velocity

0.1~100 Nm/s

Accuracy

±1~2.5%

Working Temperature

Sensor: -40℃+220℃

Transmitter: -20℃+45℃

Working Pressure

Insertion Sensor: medium pressure≤ 1.6MPa

Flanged?Sensor: medium pressure≤ 1.6MPa

Special pressure please contact us

Power Supply

Compact type: 24VDC or 220VAC, Power consumption ≤18W

Remote type: 220VAC, Power consumption ≤19W

Response Time

1s

Output

4-20mA (optoelectronic isolation, maximum load 500Ω), Pulse, RS485 (optoelectronic isolation)and HART

Alarm Output

1-2 line Relay, Normally Open state, 10A/220V/AC or 5A/30V/DC

Sensor Type

Standard Insertion, Hot-tapped Insertion?and Flanged

Construction

Compact and Remote

Pipe Material

Carbon steel, stainless steel, plastic, etc

Display

4 lines LCD

Mass flow, Volume flow in standard condition, Flow totalizer, Date and Time, Working time, and Velocity, etc.

Protection Class

IP65

Sensor Housing Material

Stainless steel 316

photobank (4).jpg

photobank (7).jpg

photobank (6).jpg

IMG_1001.JPG

IMG_1016.JPG

IMG_1018.JPG

IMG_1011.JPG

Kaifeng Hollysys gas flow meters.jpg

在線留言